 |
Step 2 - Completing the floor |
|
|
Using the cut to size piece of the previous plank, start the second row from the same point as the previous row making sure that the joints are staggered by at least 500 mm.
|
|
|
|
|
|
Angling it, connect the first plank of the second row to the previously installed row by angling it and lowering it. You may need to slightly tap it to set it into place.
|
|
| |
|
|
|
Place a laying wedge underneath this board.
|
|
| |
|
|
|
Angle the next plank and connect it to the previous one on the short end side and lower it into position.
|
|
| |
|
|
|
