 |
General |
|
|
With the Uniclic® revolutionary system you can install laminate floors without the use of glue. With the use of the tongue and groove system the planks can simply be joined by clicking them together. You can choose from two installation methods thanks to the Uniclic®:
|
|
|
Method A: The board is positioned at a 20 to 30° angle from the previously installed plank. While exerting pressure to push the plank forward move it up and down slightly until the panels click into place automatically. You can choose to insert the groove on to the tongue or choose the more common and easy way, inserting the tongue into the groove.
See fig. 1 A - 1 B - 1 C.
|
|
|
|
|
|
Method B: With the use of the Uniclic® you can also use a hammer to tap the panels into each other without lifting. This method requires the use of a special Uniclic® tapping block. Make sure to tap the planks together gradually.
See fig. 2A – 2B
|
|
|
|
|
| |
Tools for installing the floor |
|
|
Follow the instructions exactly to get the best results. You will need to use the following tools and special accessories for the installing of the laminate flooring.
- hammer
- saw
- pencil
- measure
- installation kit (crowbar, spacers (1-8mm) and Uniclic® - adapted tapping block)
- underlayment system
- maintenance products
|
|
|
