 |
Underfloor heating systems |
|
|
If you plan to install the laminate floor in a room with underfloor heating, turn on the system until a surface temperature of 18°C is reached.
The level must be maintained at 18 degrees C during the entire installation process and 3 days afterwards.
After this time, slowly increase the lead temperature.
NOTE: It is important that the surface temperature should never exceed 28°C .
|
|
| |
Installation of the laminate floors |
|
| |
Step 1 |
|
|
Prior to the installation, all boards must be checked for possible damages.
First, place the expansion spacers against the wall and then start installing the first row from a left-hand corner of the room with the tongue of the long side of the board and the groove of the short side of the board facing the wall.
|
|
|
|
|
| |
Step 2 |
|
|
The second board to be laid must be placed in a flat position on the sub-floor. Using a hammer and tapping block, gently tap on the short side of the board into the first laid one until the tongue and groove connection is closed.
|
|
|
|
|
|
|
